Trailer Parts
| Parts and Supplies used in the building of the trailer box of an Explorer Box or other compact style camping trailer. | |
|
Purchase all our trailer parts here in our Shopping Cart.
|
|
| Trailer Door Hinge: Die-cast, with stainless steel pins uses #10 screws $12.99 Each Buy Here |
 |
 |
|
| Tailgate Hinge:
3 1/2" gate style hinge. Black $7.00 ea Stainless Steel: $12.00 Buy Here |
 |
| Locking Door Latches: Chrome plated brass and stainless steel construction Separate dual function lock and latch with lift up latch loop Keyed alike for multiple locks Uses 3/4” mounting hole $15.50 ea Note: When ordering set, comes with cams for 3/8 or 1/2 Explorer Box walls. Buy Here |
 |
 |
|
| Lid Latches: Zinc plated steel construction Adjustable tension Lockable Comes with latch, catch and mounting screws $10.95 ea. Buy Here |
 |
| Footman Loops: Used for front deck hold down straps or anywhere you want to use straps for securing cargo 1/4" dia 2 5/8” overall length x 1 5/8” inside loop length Zinc plated $1.25 ea Buy Here |
 |
| Front and Side Door Seal: Ribbed EPDM weather stripping 5/16” tall x 19/32” wide Comes in black and brown Packaged in 10’ lengths $8.00 ea Available at some big-box building supply stores. Note: An Explorer box normally requires two packages. Buy Here |
 |
| Trim Head Screws: Preferred type for glue and screw corner block construction. Half the head size of normal screws for minimal filling #6 x 1” 1 lb box $5.75 ea Available at some big-box building supply stores. Note: An Explorer Box normally takes two boxes. Buy Here |
 |
| Molded Plastic Fenders:
For 13” tires 9" wide x 29-1/4" long x 12" tall Black High-density polyethylene is corrosion proof, impact resistant and able to handle temperature extremes. Molded-in color make scratches virtually invisible. $24.95 ea Buy Here |
 |
| Round Steel Fender: Work with 12” and 13” tires Comes in bare 16 gauge steel Rounded outer edge, square mounting edge 8” wide x 28 long x 10” tall $12.50 ea Buy Here |
 |
| Jeep Style Fender:
For 13” tires Comes in bare 16 gauge steel Rounded inner and outer edges 8” wide x 28 long x 10” tall, with 20” flat $$19.75 ea Buy Here |
 |
| Stabilizer / Leveling Jacks: Swing down style Can be bolted or welded on 6 1/4” lift 650 lb lift, 1000 lb support capacity (per jack) Standard Length 11.5 collapsed, 17.75 extended $22.50 ea Tall/Lifted Trailer Length 15.5 collapsed, 21.75 extended $$29.95 ea Buy Here |
 |
| Swivel Tongue Jacks: 11” lift 1000 lb lift capacity Bolts on frames up to 3” x 5” Includes mounting hardware Side crank Tough 6” caster wheel. $29.95 ea Buy Here |
 |
| Surface Mount LED Tail Lights: Combination Stop, Turn, Tail light
Sealed housing 10 LED configuration 3 wire Impact resistant PMMA lens ABS housing 1/2” x 3 1/4" overall size . .190 amp draw $15.00 ea Buy Here |
 |
| Rectangular Reflector: For rear trailer reflex Adhesive back Screw mount hole 4 3/8” x 1 1/8” $1.00 Buy Here |
 |
| Low profile LED Side Marker Lights:
Two wire, ground wire has eyelet
6 LED configuration Reflective lens Available with Amber (front) or Red (rear) lens Impact resistant PMMA lens ABS housing Mounting holes on standard 3” centers .062 amp draw $5.25 ea Buy Here |
 |
| 4-pin Wiring Harness: 20’ Long SAE compliant, 18 gauge wires $8.95 ea Buy Here |
 |
| Safety Chain: 5200 lbs rated 54” long Hook on both ends with clips $9.95 Buy Here |
 |
| 1 7/8” Ball Coupler: Zinc plated For 2” wide tube $13.95 Buy Here |
 |
| Keyed Alike Coupler / Receiver
Lockset:
Master Lock Works with pin holes sizes of 1/2” and 5/8” Adjusts and lock for couple widths of 5/8”, 1” and 2” $24.95 Buy Here |
 |
| 13” Tire and Wheel Combo: 175/80-13” Load Range C 6-ply Maximum Capacity 1360 lbs 24” Overall Diameter White Modular rims 5 on 4.5 $78.95 ea |
 |
|
Visit our Shopping Cart to Order!
|
|
